2006 Toyota Highlander Problems
What owners have reported about the 2006 Toyota Highlander: which problems and issues come up most, at what mileage, and which recalls to check.
From NHTSA owner complaints and recalls. Updated Nov 16, 2026.
Is the 2006 Toyota Highlander a good year?
It's one of the worst years for the Highlander. Owners have filed 649 complaints with NHTSA, the 1st most of 25 Highlander model years. The most reported problems involve the brakes, electrical system and engine. Brakes complaints most often came at about 47,000–153,000 miles.
649 complaints 11 recalls, 2 fire risk 1st worst of 25 Highlander years
Top 2006 Toyota Highlander problems
1 Brake lurching and ABS actuator failure reports
What to look forHide
Owners describe the car surging forward or briefly losing braking force while slowing, especially at low speed or over bumps. Some say the lurch happens as the hybrid switches from regenerative to hydraulic braking, and others say the pedal feels soft or slow to grab. Many also report loud clicking, buzzing, or grinding from the ABS unit, followed by warning lights and an expensive actuator replacement that they feel should have been a recall.
Signs to watch for
- Car lurches or surges forward when braking
- Brief loss of stopping force before the brakes grab
- Pedal feels soft or slow to engage
- ABS, VSC, or brake warning lights stay on
- Clicking, buzzing, or grinding from the ABS unit
2 Hybrid inverter failure causing sudden stalls
What to look forHide
Owners describe the hybrid system shutting down while driving, sometimes at highway speed, leaving the car without power and hard to steer or stop. Many say the car would not restart afterward, and dealers often point to the inverter as the cause. Some owners also report battery drain, no-start problems, and repair costs that were not covered.
Signs to watch for
- Engine stalls suddenly while driving
- Check Hybrid System and VSC warning lights
- Loss of power steering or braking assist
- Car will not restart after it shuts off
- Loud pop just before the shutdown
3 Hybrid inverter failure causes sudden stalling
What to look forHide
Owners of this 2006 Highlander Hybrid most often describe the vehicle suddenly losing power and stalling, sometimes at highway speed, and then refusing to restart. Many who had it diagnosed were told the hybrid inverter had failed, and some said the repair was expensive or left unfinished. Other reports include coolant leaks with overheating, engine-bay fires, and a few complaints of sudden acceleration.
Signs to watch for
- Sudden loss of power while driving
- Engine stalls and will not restart
- Check Hybrid System and VSC warning lights
- Loss of power steering or braking assist
- Temperature gauge rising from a coolant leak
4 Unexpected surges, lunging and delayed throttle response
What to look forHide
Owners of the 2006 Highlander, including the hybrid version, report the vehicle moving forward when they expected it to slow or hold steady. These reports most often come up in stop-and-go traffic, during low-speed parking maneuvers, and when pulling away from a stop after braking. Some owners say dealers could not reproduce the problem, while the most serious accounts describe crashes.
Signs to watch for
- Short pause after pressing the gas before the car responds
- Lurching forward when pulling away from a stop
- Forward surge while braking, especially at low speed
- Cruise control overshooting the set speed after resuming
- Engine revving or car moving without the driver pressing the pedal
Symptoms 2006 Toyota Highlander owners describe
How many complaints mention each symptom in the owner's own words. One complaint can mention several.
Which parts fail most
Share of complaints that name each system. One complaint can name several.
Mileage when it failed
Each dot is a complaint that gave a mileage (520 of 649). The amber line is the middle value, about 86,000 miles.
When problems were reported
Complaints by the year the problem happened.
2006 Toyota Highlander recalls
Damaged seat heater wiring can cause fire
Fire risk
The wiring in the seat heaters can be damaged when the seat cushion is compressed. If it is damaged, the copper heating element may short circuit and increase the risk of a fire.
Fix: The dealer will disconnect the seat heaters free of charge and refund the purchase price of the seat heater accessory.
Recall 16V396000 · Jun 2016Seat heater wiring can short and burn
Fire risk
Pressure on the seat cushion can damage the seat heater wiring, and the damaged wires can short out. This can cause the seat to burn and injure the person sitting in it.
Fix: A dealer will disconnect the affected seat heaters and refund the purchase price of the seat heater accessory, free of charge.
Recall 14V743000 · Nov 2014Inverter module may cause sudden hybrid shutdown
Can stall
The power module inside the inverter can overheat because its solder cannot handle the heat, which can damage its transistors. When this happens, warning lights come on, and the car may enter limp-home mode or shut off its hybrid system while driving, causing an unexpected stall and a higher risk of crash.
Fix: Your Toyota dealer will replace the intelligent power module free of charge, though cars that already had it replaced under recall 11V-342 are not included.
Recall 13V396000 · Sep 2013Crankshaft pulley may detach power steering belt
Crash risk
The adhesive bonding the outer ring of the crankshaft pulley to its inner rubber damper may be applied in too small an amount, so the outer ring can shift out of alignment. This can cause the power steering belt to come off, suddenly removing power steering assist and making the car much harder to steer, which raises the risk of a crash.
Fix: The dealer will inspect the crankshaft pulley to determine whether it came from the affected U.S. supplier, and the recall notice does not state the repair cost.
Recall 11V539000 · Nov 2011Hybrid inverter may shut off while driving
Can stall
Weak solder inside the hybrid inverter can let its transistors overheat during heavy driving, which may turn on several warning lights and put the car into limp-home mode. The hybrid system can also shut down while you drive, stalling the car unexpectedly and raising the risk of a crash.
Fix: A Toyota dealer will check the inverter's production number and replace the module free of charge if it contains the suspect transistors.
Recall 11V342000 · Jun 2011Floor carpet cover can jam accelerator pedal
Crash risk
If the clip that holds the floor carpet cover in front of the center console is not installed correctly, the cover can lean into the accelerator pedal arm. The pedal can then stick partway down instead of returning to idle, causing unintended speed and making the car harder to stop, which raises the risk of a crash.
Fix: The dealer will replace the floor carpet cover with a newly designed one free of charge, with the recall expected to begin in March 2011.
Recall 11V112000 · Feb 2011Brake fluid leak can weaken braking
Crash risk
The wrong replacement brake fluid can dry out a rubber seal in the brake master cylinder, letting fluid slowly leak into the brake booster. Over time this can change how the brake pedal feels and reduce braking performance, raising the risk of a crash.
Fix: The dealer will replace the seal with a newly designed one, free of charge.
Recall 10V499000 · Oct 2010Missing tire and load capacity labels
Crash risk
These vehicles were sold without the required labels showing tire selection and load-carrying capacity. Without that information, a driver may overload the vehicle, which can raise the risk of a crash.
Fix: The dealer will mail you the corrected label, or you can ask the dealer to install it for free.
Recall 10V036000 · Feb 2010Missing tire load capacity labels
Some vehicles sold between September 2005 and June 2008 did not have the required tire load-carrying capacity labels. This does not meet federal standards, and without the label owners may not have the correct tire load information.
Fix: The dealer will mail you a corrected label, or you can have the dealer install it for free, and the dealer will also correct your owner's manual.
Recall 10V035000 · Feb 2010Missing or incorrect load capacity label
Crash risk
Some vehicles lack a correct load capacity label, which fails federal tire and rim standard FMVSS 110. Without accurate information, the vehicle could be overloaded, increasing the risk of a crash.
Fix: Toyota will notify you and provide a new, accurate label to install over the incorrect one, free of charge.
Recall 09V223000 · Jun 2009Loose console cover can jam accelerator pedal
Crash risk
On some SUVs and hybrids, two clips holding the driver's side center console cover can loosen and let the cover lean toward the gas pedal. The cover can then keep the accelerator from returning to idle, which raises the risk of a crash.
Fix: The dealer will replace the two floor carpet cover retaining clips free of charge.
Recall 06V253000 · Jul 2006Get an email when your car gets a new recall
We check NHTSA every day. If a new recall or safety investigation covers your car, you'll hear about it the same week.
One email per new recall for the car you pick. No spam, unsubscribe anytime.
Highlander years to avoid
Total NHTSA complaints by model year. Newer years have had less time on the road, so their totals will keep climbing. See the full comparison.
2006 Toyota Highlander problems by system
Common questions
Is the 2006 Toyota Highlander a reliable year?
It's one of the worst years for the Highlander. Owners have filed 649 complaints with NHTSA, the 1st most of 25 Highlander model years. The most reported problems involve the brakes, electrical system and engine. Brakes complaints most often came at about 47,000–153,000 miles.
Are there any issues with the 2006 Toyota Highlander?
Yes. Owners have filed 649 complaints with NHTSA, most often about the brakes, electrical system and engine, and there are 11 recalls. The symptoms owners mention most are stalling while driving, sudden loss of power and sudden or unintended acceleration.
What are the most common 2006 Toyota Highlander problems?
Owners most often report problems with the brakes, electrical system, engine and acceleration and speed control. Owners describe the car surging forward or briefly losing braking force while slowing, especially at low speed or over bumps. Some say the lurch happens as the hybrid switches from regenerative to hydraulic braking, and others say the pedal feels soft or slow to grab. Many also report loud clicking, buzzing, or grinding from the ABS unit, followed by warning lights and an expensive actuator replacement that they feel should have been a recall.
Does the 2006 Toyota Highlander have brakes issues?
Yes, it's the most reported problem area for the 2006 Toyota Highlander: 240 owners (37% of complaints) have reported brakes issues to NHTSA, most often at about 47,000–153,000 miles.
At what mileage do 2006 Toyota Highlander brakes problems start?
Reported mileage ranged widely, but most complaints fell between about 47,000–153,000 miles, with a middle value near 92,000 miles.
How many recalls does the 2006 Toyota Highlander have?
11. Damaged seat heater wiring can cause fire (16V396000); Seat heater wiring can short and burn (14V743000); Inverter module may cause sudden hybrid shutdown (13V396000). Check your VIN at nhtsa.gov/recalls to see if the work was done.
Should I buy a used 2006 Toyota Highlander?
Ask for service records covering the brakes, confirm the recall work was done, and compare with the 2025, 2024 and 2016 models, which have the fewest complaints.
Source: NHTSA complaints and recalls databases. Complaints are unverified owner reports, summarized in our own words. Counts include each complaint once per model year.