2006 GMC Sierra 1500 Problems
What owners have reported about the 2006 GMC Sierra 1500: which problems and issues come up most, at what mileage, and which recalls to check.
From NHTSA owner complaints and recalls. Updated Nov 16, 2026.
Is the 2006 GMC Sierra 1500 a good year?
It's one of the better years for the Sierra 1500. Owners have filed 145 complaints with NHTSA, the 23rd most of 27 Sierra 1500 model years. The most reported problems involve the brakes, electrical system and transmission. Brakes complaints most often came at about 29,000–86,000 miles.
145 complaints 2 recalls, 2 crash risk 23rd worst of 27 Sierra 1500 years
Top 2006 GMC Sierra 1500 problems
1 Corroded brake lines and low-speed ABS pulsing
What to look forHide
Owners report brake lines rusting and corroding, which can leak fluid and let the pedal sink toward the floor, sometimes while driving or parking. Many others describe the anti-lock brakes engaging at low speeds, causing pulsing and longer stopping distances when coming to a stop. Some also report vibration or shaking during braking, which they often traced to worn rotors or drums that were resurfaced repeatedly.
Signs to watch for
- Brake pedal sinks toward the floor
- Brake fluid leak or puddle under the truck
- Pedal pulses when stopping at low speed
- Longer stopping distance at parking-lot speeds
- Steering wheel or pedal shakes when braking downhill
2 Blower resistor and wiring harness overheating, melting
What to look forHide
Owners describe the blower motor resistor and its wiring harness or connector overheating, often when the fan is on high, until the plastic melts. Many notice a burning smell from the dash or vents before the fan stops or only works on some speeds. Several say the problem returned after parts were replaced, and they considered it a fire risk that should have been recalled.
Signs to watch for
- Fan stops working or only runs on some speeds
- Burning smell coming from the dash or vents
- Smoke or melted plastic near the blower motor
- Fan works only after the wiring is jiggled
- Problem returns after the resistor or harness is replaced
3 Harsh shifting, clunking, and park engagement complaints
What to look forHide
Owners of the 2006 GMC Sierra 1500 most often describe hard or clunky gear changes, especially moving between second and third and when downshifting back. Some say dealers called the noise normal or recalibrated the transmission, and a few felt the shifting got harsher afterward. In a smaller number of reports, the truck moved into reverse or rolled while parked, which owners linked to the transmission not fully engaging park.
Signs to watch for
- Hard clunk between second and third gear
- Harsh downshift from third to second
- Jolt or clunk when pressing the accelerator
- Truck rolls or shifts into reverse while parked
- Shifting feels harder after a software recalibration
4 Front wheel bearing and hub failures
What to look forHide
Owners describe front wheels that wobble, grind, or feel loose, often with the ABS warning light coming on and the steering pulling to one side or feeling less responsive. Some of these failures happened at highway speed, and in several cases the wheel bearings or hub assembly had to be replaced. Other owners report thunking, banging, or harsh shaking over small bumps, which dealers traced to worn suspension parts such as a leaf spring or torsion bar mount.
Signs to watch for
- Front wheel wobbles or feels loose at speed
- Grinding or roaring noise from a front wheel
- ABS warning light turns on
- Steering pulls to one side or feels vague
- Thunking or shaking over small bumps
Which parts fail most
Share of complaints that name each system. One complaint can name several.
Mileage when it failed
Each dot is a complaint that gave a mileage (129 of 145). The amber line is the middle value, about 52,000 miles.
When problems were reported
Complaints by the year the problem happened.
2006 GMC Sierra 1500 recalls
Loose hub nut can cause wheel separation
Crash risk
Some replacement wheel hub assemblies sold for light and medium duty trucks can have an inboard retention nut that loosens over time. This can trigger an ABS warning light, cause noise, or let the wheel separate from the vehicle, which can lead to a crash.
Fix: Federal-Mogul will notify you and replace the affected hub assembly free of charge.
Recall 07E106000 · Dec 2007Replacement hub can weaken ABS sensor signal
Crash risk
Certain aftermarket hub assemblies for 2001-2006 GM 1500 and 2500 4WD trucks can have the ABS sensor cord pinched by the dust shield, which weakens the sensor signal. This can cause unwanted ABS activation at low speeds and can lengthen stopping distance, which could lead to a crash.
Fix: Federal-Mogul will notify you and will either credit your account or replace the hub assembly.
Recall 06E050000 · Jun 2006Get an email when your car gets a new recall
We check NHTSA every day. If a new recall or safety investigation covers your car, you'll hear about it the same week.
One email per new recall for the car you pick. No spam, unsubscribe anytime.
Sierra 1500 years to avoid
Total NHTSA complaints by model year. Newer years have had less time on the road, so their totals will keep climbing. See the full comparison.
Common questions
Is the 2006 GMC Sierra 1500 a reliable year?
It's one of the better years for the Sierra 1500. Owners have filed 145 complaints with NHTSA, the 23rd most of 27 Sierra 1500 model years. The most reported problems involve the brakes, electrical system and transmission. Brakes complaints most often came at about 29,000–86,000 miles.
Are there any issues with the 2006 GMC Sierra 1500?
Yes. Owners have filed 145 complaints with NHTSA, most often about the brakes, electrical system and transmission, and there are 2 recalls.
What are the most common 2006 GMC Sierra 1500 problems?
Owners most often report problems with the brakes, electrical system, transmission and suspension. Owners report brake lines rusting and corroding, which can leak fluid and let the pedal sink toward the floor, sometimes while driving or parking. Many others describe the anti-lock brakes engaging at low speeds, causing pulsing and longer stopping distances when coming to a stop. Some also report vibration or shaking during braking, which they often traced to worn rotors or drums that were resurfaced repeatedly.
Does the 2006 GMC Sierra 1500 have brakes issues?
Yes, it's the most reported problem area for the 2006 GMC Sierra 1500: 67 owners (46% of complaints) have reported brakes issues to NHTSA, most often at about 29,000–86,000 miles.
At what mileage do 2006 GMC Sierra 1500 brakes problems start?
Reported mileage ranged widely, but most complaints fell between about 29,000–86,000 miles, with a middle value near 52,000 miles.
How many recalls does the 2006 GMC Sierra 1500 have?
2. Loose hub nut can cause wheel separation (07E106000); Replacement hub can weaken ABS sensor signal (06E050000). Check your VIN at nhtsa.gov/recalls to see if the work was done.
Should I buy a used 2006 GMC Sierra 1500?
Ask for service records covering the brakes, confirm the recall work was done, and compare with the 2012, 2013 and 2025 models, which have the fewest complaints.
Source: NHTSA complaints and recalls databases. Complaints are unverified owner reports, summarized in our own words. Counts include each complaint once per model year.