Car Yearsto Avoid

2003 Nissan Altima Stalling While Driving

From NHTSA owner complaints and recalls. Updated Nov 16, 2026.

Why does my 2003 Nissan Altima stall while driving?

245 owners of the 2003 Nissan Altima describe stalling while driving in complaints to NHTSA, 28% of all complaints for this year. Most of those complaints point to the engine and electrical system. It was most often reported at about 55,000–103,000 miles. 3 recalls cover those systems on this year.

245 complaints 28% of all 2003 complaints 75,000 miles typical

What owners describe

Owners describe the engine cutting out while driving at highway speeds, at low speeds, when slowing for a turn, and at traffic lights. Often the engine restarts right away, but some owners lost power or nearly crashed, and the check engine or service engine light sometimes came on. Owners said dealers and independent mechanics often traced the problem to the crankshaft or camshaft position sensor, and some said the stalling continued after repairs.

What owners and dealers blamed

  • faulty crankshaft position sensor
  • failing camshaft position sensor
  • engine control module needing reprogramming

Repairs owners mention

  • crankshaft position sensor replacement
  • ECM reprogramming
  • camshaft position sensor replacement

Which systems are involved

The system each of these complaints names. One complaint can name several.

Engine 217
Electrical 33
Fuel System 10
Acceleration 8

Mileage when it started

Each dot is a complaint that gave a mileage (216 of 245). The amber line is the middle value.

When it was reported

Complaints by the year the problem happened.

Stalling While Driving by Altima year

Complaints describing this symptom, for model years with enough complaints to compare.

Related recalls

Crank sensor glitch can stall engine

Can stall

A temperature-sensitive crankshaft position sensor can briefly lose its signal, and if the car's computer does not catch it in time, the engine can stop without warning at low speed. That sudden loss of power raises the risk of a crash.

Fix: The dealer will reprogram the engine control module at no charge to you.

Recall 06V242000 · Jul 2006

Faulty engine sensor solder may fail

Can stall

The circuit board in the crank or cam position sensor may have a weak solder joint that can crack under heat, due to leftover flux from manufacturing. The engine can then stall without warning, fail to start, lose power, or show a warning light, which could cause a crash.

Fix: Your dealer will replace the crankshaft position sensor, the camshaft position sensor(s), and in some cases the variable timing control sensor(s).

Recall 03V455000 · Nov 2003

Exhaust hanger and overheating can cause fire

Fire risk

Road debris can catch on an exhaust pipe hanger pin in some 2.5-liter engines and touch the catalytic converter, and on 2002 Altima and Sentra models the pre-catalyst can overheat and damage the catalyst. Either condition can start a fire.

Fix: The dealer will remove the protruding part of the exhaust pipe hanger pin and install heat shields on the pre-catalyst and exhaust tube.

Recall 03V084000 · Mar 2003
Check your VIN for open recalls

Get an email when your car gets a new recall

We check NHTSA every day. If a new recall or safety investigation covers your car, you'll hear about it the same week.

Your car

One email per new recall for the car you pick. No spam, unsubscribe anytime.

More 2003 Nissan Altima problems

Common questions

Why does my 2003 Nissan Altima stall while driving?

245 owners of the 2003 Nissan Altima describe stalling while driving in complaints to NHTSA, 28% of all complaints for this year. Most of those complaints point to the engine and electrical system. It was most often reported at about 55,000–103,000 miles. 3 recalls cover those systems on this year.

What causes stalling while driving in the 2003 Nissan Altima?

Owners and dealers most often blamed faulty crankshaft position sensor, failing camshaft position sensor and engine control module needing reprogramming. These are owner reports, so have a mechanic confirm the cause.

How do owners fix stalling while driving in the 2003 Nissan Altima?

Repairs owners describe include crankshaft position sensor replacement, ECM reprogramming and camshaft position sensor replacement. Ask a dealer whether a recall or service bulletin covers it first, since that work can be free.

At what mileage does the 2003 Nissan Altima start stalling while driving?

Most complaints that gave a mileage fell between about 55,000–103,000 miles, with a middle value near 75,000 miles.

Is there a recall for stalling while driving on the 2003 Nissan Altima?

3 recalls cover the engine and electrical system on this year: 06V242000, 03V455000, 03V084000. Check your VIN at nhtsa.gov/recalls to see if the work was done.

Source: NHTSA complaints and recalls databases. Complaints are unverified owner reports, summarized in our own words. A complaint counts here when the owner's own description mentions this symptom.

Terms & Conditions

Car Years to Avoid summarizes public NHTSA owner complaint and recall data for general information only. Complaints are unverified owner reports, so treat them as a guide, not a verdict on any specific vehicle.

Nothing here is mechanical, legal or buying advice. Always check a VIN at nhtsa.gov/recalls and get a pre-purchase inspection. We may earn from ads and partner links. Not affiliated with NHTSA or any automaker.

Privacy

If you sign up for recall alerts, we store your email and the car you picked, and use them only to send those alerts. We never sell your email, and you can unsubscribe anytime from any alert.

Like most sites, we use cookies and analytics tools (Google Analytics and Microsoft Clarity) to understand how people use the site and keep it free.