Car Yearsto Avoid

2018 Jeep Wrangler Loss of Power Steering

From NHTSA owner complaints and recalls. Updated Nov 16, 2026.

Why does my 2018 Jeep Wrangler lose power steering?

86 owners of the 2018 Jeep Wrangler describe loss of power steering in complaints to NHTSA, 5% of all complaints for this year. Most of those complaints point to the steering and electrical system. It was most often reported at about 3,000–28,000 miles. 4 recalls cover those systems on this year.

86 complaints 5% of all 2018 complaints 8,000 miles typical

What owners describe

Owners describe power steering cutting out or the wheel suddenly stiffening or locking, most often at highway speeds or while turning. Many say warning lights come on at the same time, and the steering sometimes returns after a few seconds or once they slow down. Several report near-collisions, and dealers frequently could not reproduce the problem at first, with some repairs not stopping it.

What owners and dealers blamed

  • faulty CAN bus connector behind the glove box
  • moisture in the wiring harness
  • failed battery

Repairs owners mention

  • CAN bus connector replacement
  • wiring harness replacement
  • software update

Which systems are involved

The system each of these complaints names. One complaint can name several.

Brakes 10

Mileage when it started

Each dot is a complaint that gave a mileage (36 of 86). The amber line is the middle value.

When it was reported

Complaints by the year the problem happened.

Loss of Power Steering by Wrangler year

Complaints describing this symptom, for model years with enough complaints to compare.

Related recalls

Instrument panel cluster can short and fail

Crash risk

The instrument cluster can develop an internal short circuit and stop working, so the speedometer and warning lights may not display. Without that information, the risk of a crash goes up.

Fix: Dealers will replace the instrument panel cluster at no charge.

Recall 24V652000 · Sep 2024

Powertrain module chip can stall engine

Can stall

A voltage regulator chip inside the powertrain control module can fail, causing the engine to stall or not start. A sudden stall can increase the risk of a crash.

Fix: Chrysler will notify you, and your dealer will replace the powertrain control module free of charge.

Recall 18V524000 · Aug 2018

Steering shaft weld may split, causing loss of control

Crash risk

The intermediate steering shaft may not have been welded properly, so the weld can split. This can cause the steering wheel to lose its center position, making the steering less responsive and raising the risk of a crash.

Fix: Dealers will inspect the intermediate steering shaft and replace it if needed, at no cost to you.

Recall 18V343000 · May 2018

Cruise control may not switch off

Crash risk

A short in the wiring can keep the cruise control engaged even when you press the brake or turn the system off, so the car may hold its speed or speed up. This raises the risk of a crash, so stop using cruise control until the repair is done.

Fix: The dealer will update the engine or powertrain control software at no charge.

Recall 18V332000 · May 2018
Check your VIN for open recalls

Get an email when your car gets a new recall

We check NHTSA every day. If a new recall or safety investigation covers your car, you'll hear about it the same week.

Your car

One email per new recall for the car you pick. No spam, unsubscribe anytime.

More 2018 Jeep Wrangler problems

Common questions

Why does my 2018 Jeep Wrangler lose power steering?

86 owners of the 2018 Jeep Wrangler describe loss of power steering in complaints to NHTSA, 5% of all complaints for this year. Most of those complaints point to the steering and electrical system. It was most often reported at about 3,000–28,000 miles. 4 recalls cover those systems on this year.

What causes loss of power steering in the 2018 Jeep Wrangler?

Owners and dealers most often blamed faulty CAN bus connector behind the glove box, moisture in the wiring harness and failed battery. These are owner reports, so have a mechanic confirm the cause.

How do owners fix loss of power steering in the 2018 Jeep Wrangler?

Repairs owners describe include CAN bus connector replacement, wiring harness replacement and software update. Ask a dealer whether a recall or service bulletin covers it first, since that work can be free.

At what mileage does the 2018 Jeep Wrangler start loss of power steering?

Most complaints that gave a mileage fell between about 3,000–28,000 miles, with a middle value near 8,000 miles.

Is there a recall for loss of power steering on the 2018 Jeep Wrangler?

4 recalls cover the steering and electrical system on this year: 24V652000, 18V524000, 18V343000, 18V332000. Check your VIN at nhtsa.gov/recalls to see if the work was done.

Source: NHTSA complaints and recalls databases. Complaints are unverified owner reports, summarized in our own words. A complaint counts here when the owner's own description mentions this symptom.

Terms & Conditions

Car Years to Avoid summarizes public NHTSA owner complaint and recall data for general information only. Complaints are unverified owner reports, so treat them as a guide, not a verdict on any specific vehicle.

Nothing here is mechanical, legal or buying advice. Always check a VIN at nhtsa.gov/recalls and get a pre-purchase inspection. We may earn from ads and partner links. Not affiliated with NHTSA or any automaker.

Privacy

If you sign up for recall alerts, we store your email and the car you picked, and use them only to send those alerts. We never sell your email, and you can unsubscribe anytime from any alert.

Like most sites, we use cookies and analytics tools (Google Analytics and Microsoft Clarity) to understand how people use the site and keep it free.