2013 Ford Focus Problems

The Canister Purge Valve (CPV) may malfunction, causing the engine to stall unexpectedly while driving. An engine that stalls while driving increases the risk of a crash.

Fix: Dealers will update the powertrain control module (PCM) software, free of charge.

The engine block heater can crack and leak coolant. When it is plugged in, the leak can cause an electrical short circuit, which raises the risk of a fire.

Fix: Do not plug in the block heater until it is fixed; the dealer will replace the block heater free of charge.

These vehicles were previously recalled and repaired under recalls 15V-246, 16V-643 or 17V-210, however the repair may not have been completed properly. A component within the door latches may break making the doors difficult to latch and/or leading the driver or a passenger to believe a door is securely closed when, in fact, it is not. A door that is not securely latched could open while the vehicle is in motion, increasing the risk of injury to a vehicle occupant.

Fix: Ford will notify owners, and dealers will inspect the latch date codes to confirm if the repair was done correctly, and replace the side door latches if necessary, free of charge. Owners will also have the option to inspect their own vehicle's door latches and enter the date codes into a website to determine if the latches are correct.

0L GDI gasoline engines and 2013-2014 Focus ST vehicles equipped with 2.0L GTDI engines, previously recalled under 18V-735. The affected vehicles did not have the Powertrain Control Module (PCM) updated as intended. Therefore, the Canister Purge Valve (CPV) may malfunction, possibly causing excessive vacuum in the fuel vapor management system. The excessive vacuum may result in an engine stall while driving, without warning and without the ability to restart the vehicle, increasing the risk of a crash.

Fix: Ford will notify owners, and dealers will reprogram the Powertrain Control Module. Dealers will also check for fault codes and replace the CPV as needed.

0L GDI or 2.0L GTDI engine. The Canister Purge Valve (CPV) may malfunction, possibly causing excessive vacuum in fuel vapor management system. The excessive vaccuum may result in an engine stall while driving, without warning and without the ability to restart the vehicle, increasing the risk of a crash.

Fix: Ford will notify owners, and dealers will reprogram the Powertrain Control Module. Dealers will also check for fault codes and replace the CPV as needed.

The hatchback of the affected vehicles may be unlatched with a single press of the interior latch release button. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 206, "Door Locks and Door Retention Components." With only a single press needed, the driver may accidently unlatch the hatchback, increasing the risk of injury to any unsecured passengers in the back.

Fix: Ford will notify owners, and dealers will reprogram the Body Control Module with updated software, free of charge.

A part inside the door latch can break, so the door may not latch or may look closed when it is not. A door that is not securely latched could open while the vehicle is moving and injure someone inside.

Fix: The dealer will replace the door latches with an improved part free of charge.

Poorly crimped wiring connections to the manifold pressure sensor can send incorrect signals to the engine computer. This can make the vehicle hesitate or the engine stall, which raises the risk of a crash.

Fix: The dealer will replace the crimped wiring splices with new ones at no cost to you.

0 liter engines and Focus ST vehicles manufactured February 14, 2012, to October 14, 2013, and equipped with 2.0 liter engines. Insufficient compression in the engine wiring harness splices to the Manifold Absolute Pressure (MAP) sensor may provide incorrect signals to the powertrain control module (PCM). The incorrect signals could cause the vehicle to hesitate or the engine to stall, increasing the risk of a crash.

Fix: Ford will notify owners, and dealers will replace the current crimped splices with new splices, free of charge.

The front side marker lamps may not work because of a wiring mismatch, so the vehicle does not meet federal lighting requirements. Without them, the car is harder to see at night, which raises the chance of a crash.

Fix: The dealer will modify the headlamp assembly wiring free of charge.

The left rear door child lock was built incorrectly. As a result, the child lock may not engage when the operator uses normal force to activate the child lock. The operator may incorrectly believe the child lock is engaged. However, the door may be opened from the inside, increasing the risk of injury to an unrestrained child.

Fix: Ford will notify owners, and dealers will inspect the affected rear door latches, and replace them as necessary, free of charge.

This recall involves aftermarket parts sold by Yakima Products, Inc. for use on model year 2012 and 2013 Ford Focus vehicles. This recall is being conducted by Yakima, not by Ford. Certain combined Q-Tower and Q128 Clip rooftop rack systems, part numbers 8000124 and 8000728, do not fully contact the door frame. Without proper contact of the rooftop rack clip to the door frame, there is insufficient clamping pressure and friction. The system may slide off the vehicle when loaded with accessories, possibly becoming a road hazard to other vehicles or causing injury to pedestrians.

Fix: Yakima will notify owners, and Yakima or a Yakima dealer will refund the purchase of the Q-Tower and Q-128 Clip system. There is no replacement system available for the 2012-2013 model year Ford Focus.