2024 Ford Escape Problems

The cylinder head may have been improperly manufactured, which can cause the ball plugs to fail, resulting in an oil leak. An oil leak can result in loss of drive power, increasing the risk of a crash. In addition, an oil leak in the presence of an ignition source such as hot engine or exhaust components, can increase the risk of a fire.

Fix: Dealers will replace the cylinder head assembly as necessary, free of charge.

5L or 2.0L MPC engine and an engine block heater. The engine block heater may overheat when the vehicle is parked with the block heater plugged in. An overheated engine block heater can increase the risk of a fire.

Fix: Dealers will replace the block heater element and inspect the electrical cord, replacing it if necessary, free of charge. Owners will also have a alternative option to replace engine block heater element with a threaded blanking plug coupled, and remove the block heater electrical cord.

A software error may cause the rearview camera image to delay, freeze, or not display when the vehicle is in reverse. A frozen or missing rearview camera image can reduce the driver's view behind the vehicle, increasing the risk of a crash.

Fix: The accessory protocol interface module (APIM) software will be updated by a dealer or through an over-the-air update, free of charge. This will be a phased campaign, with the remedy becoming available in different phases based on model and model years.

A manufacturing defect in one or more of the high voltage battery cells may result in an internal short circuit and battery failure. Battery failure can cause a loss of drive power, increasing the risk of a crash. Battery failure can also increase the risk of a fire.

Fix: Owners are advised not to charge battery till the remedy has been completed. Dealers will perform a battery energy control module (BECM) software update, and replace the high voltage battery pack, as necessary, free of charge.

The air bag warning label may be missing from the dashboard. As such, these vehicles fail to comply with the requirement Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection." Without a label that shows the proper restraint usage guidelines, the occupants may have an increased risk of injury in the event of a crash.

Fix: Ford will mail owners the warning labels, free of charge.

The passenger side instrument panel cover may have been manufactured incorrectly, which can cause the air bag not to deploy as intended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection." During air bag deployment, the air bag cover may break and project fragments into the vehicle, or the air bag may deploy improperly, increasing the risk of occupant injury.

Fix: Dealers will replace the passenger side instrument panel cover, free of charge.

The fuel injectors may have been assembled without O-ring support discs, which can result in a fuel leak. A fuel leak in the presence of an ignition source increases the risk of a fire.

Fix: Dealers will install new fuel injector O-rings and O-ring support discs, free of charge.

The cruise control radar module was misaligned during production. Misalignment of the radar module can result in the Adaptive Cruise Control (ACC) misclassifying an overhead object as an object in the vehicle's path, causing the vehicle to unexpectedly slow and/or stop. Other safety systems that depend on the radar model (Pre-Collision Assist, Forward Collision Warning, and Auto Emergency Braking) could have diminished or lost function. These conditions increase the risk of a crash.

Fix: Dealers will adjust the angle of the radar module, free of charge.